Home > Black Screen > Gateway MT6840 Blank Screen

Gateway MT6840 Blank Screen


Maybe I'm just lucky? Thank you SO much for you help. Unbelievable.. I'm going to use it as a bridge to connect traces on both sides of the motherboard. 3. Source

Remove two screws (red circle) securing the hard drive. What can i do with this pile of scrap now any ideas??. Simply press the power button on your laptop. I removed the mainboard and examined the DC power connector and found it intact and secure. http://ccm.net/forum/affich-585535-gateway-laptop-blank-screen

Gateway Laptop Black Screen Fix

I didn't realize the power jack had to contact both sides of the board with that sleeve. After that, the voltage going to the fan is lower and it will not start. I know that it would be good to see the picture of my repair, but the laptop is already assembled and charging the battery.

Maybe, my practice has prevented me from getting into KSOD. IML Tech April 1, 2009 | Beverly, I cannot answer your question. The memory slots is located under the cover on the bottom. Gateway 3ds Black Screen Im been waiting for a respond,, see ya IML Tech May 27, 2009 | Benny, I have a mt6451 i have problem with wireless adapter I have a Linksys router in

Boot the computer using the XP CD. Gateway Laptop Black Screen On Startup So i had to open it again and put some thermal compound between the fan and cpu which fixed the over heating problem. Remove one screw (orange circle) securing the Wi-Fi card cover. Rate my ...

Excellent work friend. Gateway Laptop Black Screen Of Death Please let me know if you can help me out. IML Tech January 7, 2010 | Gil, I have this laptop and I was told by the laptop place where I took it that I need a new motherboard. After the locking tab is opened, the keyboard cable is released you you can pull it from the connector.

Gateway Laptop Black Screen On Startup

Close Yes, keep it Undo Close This video is unavailable.

This feature is not available right now. Gateway Laptop Black Screen Fix Googled a little but could find only expensive ones. Gateway Laptop Black Screen With Cursor IF you're hardware-savvy enough to be comfortable getting into the guts of your wife's laptop, get yourself a can of compressed air and a magnetized screwdriver, and open it up. (Blowing

Remove five screws securing the motherboard. this contact form windows started with explorer. 6. After some research I found the problem, thanks to this site.You are getting this error message because the laptop is missing driver for the SATA hard drive. Release the cable and remove the keyboard. Gateway Desktop Black Screen

I wanted to check the power jack since the plug in to the laptop from ac adapter melted in the jack. If you're still having trouble, ... If the computer has run out of charge or is in hibernation or sleep mode, if the screen is too dark, or if the ... http://itinfosecure.com/black-screen/gateway-ne71b-screen-stays-black.php Maybe you'll find something similar in there.

Anyway thanks for the guide. Gateway Laptop Black Screen After Login Just gave my Gateway to my nephew because I got a new one--and after the first time he used it--I got the "black" screen thing and it would not boot up. biggonyou : Computer Whisperer 8,031 views 8:26 How to possibly fix a PC that will turn on but will not beep and will not display anything on screen - Duration: 22:19.

Thread Status: Not open for further replies.

Cube Computer Channel 1,893 views 13:22 Gateway Monitor Repair - Duration: 8:52. The replacement worked but the power connection had a short. Thanks for putting it together! Gateway Computer Black Screen Note, I had no problems after the copper sleeve popped out with the rear pin.

Language: English (UK) Content location: United Kingdom Restricted Mode: Off History Help Loading... I put it back now the fan the lights come on but no video. I doubt it even exist. http://itinfosecure.com/black-screen/gateway-laptop-goes-black-after-bios-splash-screen.php HP Pavilion 520N PC Desktop Cannot Clone Screen to External Monitor Acer One Aspire Something to try if you think the ability is being hijacked by something running in the system.

You can change this preference below. When you do that, one side of the tab goes up at a 90 degree angle, but the other side must stay attached to the connector base. Unplug the touch pad cable from the system board. The trick is hitting the right key at the right time.

Plus I figure it'll be a good learning experience. The processor is located right under the heat sink which I'm removing in steps 2-3. There is only one memory slot available for memory upgrade in this model because 512MB of RAM integrated into the motherboard. will only run off of dc power after being charged by ac.

The MT6707 had screws in the same location and your instructions were fabulous (though I myself didn't have the skill it took to re-solder the power jack and took the naked Motherboards due come with all the ports for wireless cards, hardrive, ram and such right? Plug in the cable 3. I tried to take it all the way apart but was unsuccesful.

If you are experiencing a similar issue, please ask a related question Suggested Solutions Title # Comments Views Activity Installing Windows, when you have no CDs, or recovery partition. 8 363 If you DO remove them completely, pay attention to the little holes - they sit on the pins then fold down to lock the cable in place. Good luck View all 12 comments Report Fhkss- Jun 20, 2011 at 06:09 PM Oh praise you. I need to know where to get a replacement part or do I need to replace it?